Yealink SIP-T20 User Manual download pdf (Page 58)

User Guide for the SIP-T20P/SIP-T20 IP Phone

5. Click Add to add the replace rule.

When you enter the number ―1‖ using the keypad and then press the OK key, the

phone will dial out ―1234‖ instead.

Note

To e dit a replace rule via web user interface:

1. Click on Settings->Dial Plan->Replace Rule.

2. Select the desired replace rule by checking the check box.

3. Edit the values in the Prefix and Re place fields.

4. Enter the desired line ID in the A ccount field or leave it blank.

5. Click Edit to accept the change.

To delete one or more replace rules via web user interface:

1. Click on Settings->Dial Plan->Replace Rule.

2. Select one or more replace rules by checking the check box(es).

3. Click Del to delete the replace rule(s).

Note

You can configure one or more dial-now rules (up to 100) on your phone. When the

dialed out number matches the dial-now string, the number will be dialed out

automatically. For example, a dial-now rule is configured as ―2xx‖, then any entered

three-digit string beginning with 2 will be dialed out automatically on the phone.

To add dial-now rule via web user interface:

1. Click on Settings->Dial Plan->Dial now.

2. Enter the desired value (e.g., 1234) in the Rule field.

The valid values of Account field can be one or more digits between 1 and 2. Each digit

must be separated by a comma. For example, when you enter the value ―1, 2‖ in the

Account field, this replace rule will apply to account1 and account2.

If you leave the Account field blank or enter 0, the replace rule will apply to all accounts.

Replace rule is configurable via web user interface only.

1 2 ... 53 54 55 56 57 58 59 60 61 62 63 ... 125 126

No comments

Yealink SIP-T20 User Manual Page 58