Yealink SIP-T20 User Manual download pdf (Page 109)

Troubleshooting

This chapter provides general troubleshooting information to help to solve the problems

you might encounter when using your SIP-T20P/SIP-T20 IP phone.

If you require additional information or assistance with your new phone, contact your

system administrator.

Why is the LCD screen blank?

 Ensure that the phone is properly plugged into a functional AC outlet.

 Ensure that the phone is plugged into a socket controlled by a switch that is on.

 If the phone is plugged into a power strip, try plugging it directly into a wall outlet

instead.

 If your SIP-T20P IP phone is powered from PoE, ensure you use a PoE-compliant

switch or hub.

Why does the phone display "Network Unavailable"?

 Ensure that the Ethernet cable is plugged into the Internet port on the phone and

the Ethernet cable is not loose.

 Ensure that the switch or hub in your network is operational.

Why does the phone display ―No Service‖?

The LCD screen prompts ―No Service‖ message when no SIP account registers

successfully.

Why doesn’t the phone display time and date correctly?

Check if you have configured the phone to obtain the time and date from the SNTP

server automatically. If the phone fails to connect the SNTP server, you need to configure

the time and date manually.

How do I find the basic information of the phone?

Press the OK key when the phone is idle to check the basic information of the phone,

such as the IP address and firmware version. For more the basic information, refer to

Phone Status on page 13.

1 2 ... 104 105 106 107 108 109 110 111 112 113 114 ... 125 126

No comments

Yealink SIP-T20 User Manual Page 109