Yealink SIP-T20 User Manual download pdf (Page 27)

Getting Started

3. Press or to select IPv4, IPv6 or IPv4 & IPv6 from the IP Mode field.

4. Press to accept the change.

To configure a static IPv4 address via phone user interface:

1. Press .

2. Select Settings->Advanced (password: admin) ->Network->WAN Port.

3. Press to select IPv4 and press .

4. Press to select Static IP and press .

5. Enter the desired values in the IP Address, Subnet Mask, Default Gateway, Pri.DNS

and Sec.DNS fields respectively.

6. Press to accept the change.

To configure a static IPv6 address via phone user interface:

1. Press .

2. Select Settings->Advanced (password: admin) ->Network->WAN Port.

3. Press to select IPv6 and press .

4. Press to select Static IPv6 and press .

5. Enter the desired values in the IPv6, IPv6 Prefix, IPv6 Gateway, IPv6 Pri.DNS and

IPv6 Sec.DNS fields respectively.

6. Press to accept the change.

If you are using an xDSL modem for IPv4 network connection, you can connect your

phone to the Internet via PPPoE mode. Set the WAN port as a PPPoE port. The PPPoE port

will perform a PPP negotiation to obtain the IP address. Contact your system

administrator for the PPPoE user name and password.

1. IP Address: 192.168.0.3

123

1. IP Mode:

◄ IPv4 & IPv6 ▶

1. IPv6: 2005:1:1:1::12

2aB

1 2 ... 22 23 24 25 26 27 28 29 30 31 32 ... 125 126

No comments

Yealink SIP-T20 User Manual Page 27