Yealink SIP T46G Specifications download pdf (Page 26)

User Guide for the SIP-T46G IP Phone

Power over Ethernet

With the included or a regular Ethernet cable, the SIP-T46G IP phone can be powered

from a PoE-compliant switch or hub.

To connect the PoE:

1. Connect the Ethernet cable between the Internet port on the phone and an

available port on the in-line power switch/hub.

Note

After your phone is powered on, the system boots up and performs the following steps:

Automatic Phone Initialization

The phone finishes the initialization by loading the saved configuration. The LCD screen

displays "Initializing…Please wait" during the initialization.

DHCP (Dynamic Host Configuration Protocol)

The phone attempts to contact a DHCP server in your network to obtain valid IPv4

network settings (e.g., IP address, subnet mask, default gateway address and DNS

address) by default.

Note

If in-line power is provided, you don’t need to connect the phone to the power adapter.

Make sure the switch/hub is PoE-compliant.

The phone can also share the network with another network device such as a PC

(personal computer). This is an optional connection.

Important! Do not remove power to the phone while it is updating firmware and

configurations.

If your network does not use DHCP, proceed to Basic Network Settings on page 16.

1 2 ... 21 22 23 24 25 26 27 28 29 30 31 ... 181 182

No comments

Yealink SIP T46G Specifications Page 26