Yealink W52P User Manual download pdf (Page 32)

User Guide for the W52P IP DECT Phone

2. Press the Save soft key to accept the change or the Back soft key to cancel.

Note

You can lock the handset keypad to prevent keys from being accidentally pressed.

To lock the keypad:

1. Long press when the handset is idle until the LCD screen prompts “Keypad

Locked, Press and hold „#‟ to unlock!”.

The keypad is locked and the icon appears on the idle screen.

You can still answer or reject incoming calls as usual. You can also end the

answered call by pressing .

To unlock the keypad:

1. Long press again until the LCD screen prompts “Keypad Unlocked”.

The keypad is unlocked and the icon disappears from the idle screen.

Note

You can locate a misplaced handset using the base station to which the handset is

registered.

To locate a handset:

1. Press on the base station.

All handsets registered to this base station will ring simultaneously (Paging) and

display the IP address of the base station on the LCD screen.

This helps you locate your handset easily.

You can press any key on the handset or press again on the base station to

end paging.

You can also locate handsets via web user interface at the path

Status->Handset&VoIP.

If the ringer volume is adjusted to the minimum, the icon will appear on the idle

screen.

If the keypad is locked, only the emergency numbers can be dialed out. You must enter

the emergency number continuously. To place emergency calls, you should configure the

emergency numbers in advance. For more information, refer to Emergency Numbers on

page 40.

1 2 ... 27 28 29 30 31 32 33 34 35 36 37 ... 83 84

No comments

Yealink W52P User Manual Page 32