Yealink W52P User Manual download pdf (Page 57)

Phone Settings

You can trigger the auto provisioning process using the wizard. After you enter the user

name and password in the wizard and confirm to perform an update, the base station

tries to connect the RPS (Redirection and Provisioning Service) server. If the base station

successfully connects the RPS server, the RPS server responds the base station with the

URL for downloading the configuration files. Then the base station tries to perform auto

provisioning. Contact your system administrator for the user name and password used

to connect the RPS server.

To trigger the auto provisioning process:

1. Press to enter the main menu.

2. Select ->System Settings->Auto Provision.

3. Enter the system PIN (default: 0000) and press the Done soft key.

4. Enter the valid value in the Username field and press the OK soft key.

5. Enter the valid value in the Password field and press the OK soft key.

The LCD screen prompts “Update now?”.

6. Press the Yes soft key to perform an update or press the No soft key to cancel.

Eco mode+ turns off the transmission power and the radio waves emitted are

virtually zero when the phone is in the standby mode. If the eco mode+ is

enabled, and there is no signal interaction between the handset and the base

station, the color of the signal strength indicator on the idle screen displays in

green. When a call comes in or a connection occurs, the phone exits the eco

mode+ automatically, and the signal strength indicator on the idle screen

changes from green to white.

To configure eco mode+:

1. Press to enter the main menu.

2. Select ->System Settings->Eco Mode+.

3. Press the Change soft key to check or uncheck the Eco Mode+ checkbox.

4. Enter the system PIN (default: 0000) and press the Done soft key.

The LCD screen prompts “Are you sure you want to reboot the base station?”.

5. Press the Yes soft key to reboot the base station.

The base station reboots to make the configuration take effect. The configuration

applies to all the handsets registered to the base station.

1 2 ... 52 53 54 55 56 57 58 59 60 61 62 ... 83 84

No comments

Yealink W52P User Manual Page 57