Yealink SIP-T22 User Manual download pdf (Page 35)

Professional IP Phone Using the Advanced Phone Functions

- 31 -

Network Setting

Please refer to the previous part “Configuration and Registration” for the basic Network

WAN setting information. The following table lists the instruction of the field about the

Network LAN Setting.

Field Name Description

As an Bridge If you select the Bridge mode, then the two Fast Ethernet ports

will be transparent.

As an Router If you select the Router mode, the SIP phone will work as a

router

IP address User could configure the LAN port IP address.

DHCP Server If you set the DHCP server on, the device connected to the LAN

port will get the IP address automatically between the start IP

address and the end IP address. But if you select the bridge

mode, the DHCP server can not work.

Starting IP Indicate the range of the IP address

End IP Indicate the range of the IP address

To configure LAN settings via Phone interface:

1) Press Menu->Settings->Advanced Setting.

2) Enter the password required, scroll to Network option, press Enter softkey, select

LAN Port Option, press Enter softkey.

3) If you choose Bridge, it will return to the previous menu.

4) If you choose Router, you will be prompted to enter the IP Address, Subnet Mask,

DHCP Server Disable/Enable.

5) Press Save softkey to save the changes, or Cancel softkey to return to the previous

menu.

To configure LAN settings via Web interface:

Choose Network->LAN Setting to do the relating configuration, you can set the starting

and end IP address only via Web interface. You can consult your system administrator

for more information.

1 2 ... 30 31 32 33 34 35 36 37 38 39 40 ... 45 46

No comments

Yealink SIP-T22 User Manual Page 35