Yealink SIP-19P User Manual download pdf (Page 9)

Enterprise IP Phone Getting Started

- 5 -

Network Settings

Choose Network->Internet Port(WAN)，

DHCP: By default the phone attempts to contact a DHCP Server in your network in

order to obtain its valid network settings, e.g. IP address, sub mask, gateway, DNS

server, etc.

Static IP Address: If your phone cannot contact a DHCP Server for any reason, you

need to enter the network stings manually via Static IP Address. Please contact your

internet administrator for more details.

PPPoE: If you are using the xDSL Modem, you can connect your phone to the internet

via PPPoE mode. Please contact your ISP for the User Name and Password for internet

access.

Note:

Using the wrong network parameters may result in inaccessibility of your phone and

may also have an impact on your network performance! Please contact your network

administrator!

Account Settings

The phone attempts to register to the SIP server using the account/registrar data

provided by the automatic or manual initialization.

Choose Account, you will find the following parameters:

Field Description

Line Active You can choose on/off to enable/disable the account

respectively

Display Name It is showed as Caller ID when making a phone call

User Name It is provided by ISP for registration

Password It is provided by ISP for registration

SIP Server & Port Server for registration, provided by ISP

When you have done the Network and Account Setting configuration, the Register

Status Icons will show in the idle screen:

Registered successfully

Registering

Note:

Should the IP PBX (SIP registrar) require an authentication, you will be prompted to

enter the correct password. Make sure you are using the appropriate input mouthed or

enter the password via the web user interface.

1 2 3 4 5 6 7 8 9 10 11 12 13 14 ... 41 42

No comments

Yealink SIP-19P User Manual Page 9